Owning a vehicle is always a perfect feeling, and no doubt, the same can ease your journey from one place to another. Though it is helpful in transportation, sometimes, even a small issue in your vehicle can create discomfort for the owners. One such issue is operating the vehicle’s system that includes various indication lights. And one of the indications light is the StabiliTrak that helps sensors to determine whether one wheel of the car is slipping or not. StabiliTrak’s problem is that it is not easy to turn it off as it requires a bit of knowledge. In this blog, we will discuss how to turn off StabiliTrak in different vehicles.
Check out our product review on the best electric fuel pump for carb.
How do StabiliTrak works?
Stabilitrak is the name given to the Electronic Stability Control to GM’s proprietary. It is a standard safety feature available in all the cars of the GM family. Electronic stability control is a traction system that uses a sensor to determine the car’s slipping wheel. After this, the vehicle applies anti-lock brakes to the slipping side, which eventually helps you move forward. The ESC system in GM helps avoid slips and alters the trajectory of the vehicle. But as stated above, understanding how to turn off StabiliTrak is a task.
How to turn off StabiliTrak?
Turning off, StabiliTrak can be a bit trickier. It becomes even more difficult if you do not know how your vehicle’s system works. Each vehicle has different specifications, and turning the StabiliTrak can be different and varies from vehicle to vehicle. You can either read your vehicle’s user manual or go through this blog if your vehicle is mentioned in the list below.
You can also visit our reviews on the best pedal commander.
Turning off StabiliTrak in different GM vehicles
GM family of vehicles consists of several big brand cars like Ford, Toyota, Chevrolet, and Volkswagen. All these brands have a different manufacturing process, and so do the specifications of their system. Below mentioned are some ways through which you can turn off StabiliTrak in the following vehicle brands. Let’s start with all the cars which come under the GM family.
How to turn off StabiliTrak in Ford
In Ford, to turn off the StabiliTrak, you have to press the traction button and release it on an immediate basis. Then hold the button for a few seconds, and traction control will automatically disable. Moreover, if you are confused, you can always check the car’s menu for better clarity. In Ford, steering wheels will play an essential role. With the wheels’ help, take control over the cluster instrument, and half of the task is done.
Now at the steering wheel’s left part, you will notice a black arrow; you have to press that. Once you have pressed the black arrow, slightly scroll downwards with the help of the arrow. You can search for all the options in the settings. Now from the options, select DRIVER ASSIST and make sure you are press OK after selecting. Once this is done, you can see the Traction Control option right before it. That’s all; this states that you have completed the process and at last press, OK, and you are good to go.
How to turn off StabiliTrak in Chevrolet
If you own a Chevrolet, then you have to press the center button to undergo the process. After pressing the button for a few seconds, you will notice that traction control lights are on. Now check the machine lister, and it would be visible. After this, a message would be shown to you to make you understand the whole process. Now here, your job is done. The StabiliTrak of the Chevrolet can be easily turned on automatically. Once you cross the 56km/hour speed, you will notice that traction lights are also turned off automatically.
How to turn off StabiliTrak in Volkswagen
So the first step is to convert the car into the accessory mode, also make sure that the ignition is turned on. Here turning on the engine is not necessary. After this, go through the lights and place your hands on the hazard warning lights. You can easily find those lights as the triangle button. Now press the button, and once the hazard lights are on, we can move to the next step. Now going forward, slightly press the gas pedals and start by pressing one by one. Then repeat the process with the remaining four pedals also and at last press all five together. The car will slightly move forward, and here your job is done. The TC will complete the other process automatically.
How to turn off StabiliTrak in Toyota
If you have a Toyota, you will be relaxed to know that the process is way more comfortable than it looks like. You must be noticing a VSC button on your vehicle. Put your hand over the button and now slightly press it. You have to press it for the time being before releasing it. And here you are done. Now you have disabled the VSC along with the TRAC. Once the entire process is completed, you will get a message which states that your VSC is turned off. With VSC, the TRAC indicators will also be turned off.
RAM, FIAT, Jeep, and Chrysler
Suppose you notice that the engine is working properly, but still your vehicle has stopped. In that case, it is the indication that StabiliTrak’s process needs to be performed. All you need to do is press the ESC button and keep pressing it for 5 to 6 seconds. And after this, you will hear the machine stating is process is successfully completed. Later you will see that the ESC button has automatically turned off.
Conclusion
After reading this blog, you might have understood the process of turning the StabiliTrak off. Now you can easily turn off the StabiliTrak without any professional help. All you need to do is go through the settings of the device and change the settings. But make sure to check the safety features after turning it off. So that’s all from this blog; we hope it had helped you understand the settings and turn off StabiliTrak.
You may read our other blog: How to turn on daylight running lights Silverado?
