Upgrading your car amplifier can change your audio quality. It is an electronic transistor circuit that uses capacitors to modify the passage of electrons. An excellent amp is the vitality of your subwoofer and unit. Therefore, the best car amplifier for bass will help boost your audio signal.
An amplifier gives more power to speakers. As such, it allows them to reach better sound quality and extra bass. Also, a high-quality amp provides dominance for bass. Besides, it offers speaker output, distortion, and enhances your systems to operate at maximum capacity.
However, selecting the right one for your car might seem a little bit hard. Hence, this article covers the ten best car amplifier for bass. So, read on to learn more as the buying guide and FAQs will help you. Meanwhile, check out our product reviews on the best synthetic motor oil.
Comparison Table of Best car amplifier for bass
| Product Images | Brands | Price & Details |
|---|---|---|
  | 1. Kenwood KAC-M3004 | |
| 1. Kenwood KAC-M3004 | |
  | 2. Boss Audio R1100M | |
  | 3. Rockford Fosgate R500X1D | |
  | 4. NVX- VAD27001 Class D Monoblock | |
  | 5. Rockford Fosgate PBR300X4 | |
  | 6. Alpine X-A90V X-Series | |
  | 7. JL Audio JX 1000/1D | |
  | 8. Planet Audio AC1200 | |
  | 9. Pioneer GM-D9701 | |
  | 10. Alpine R-A75M |
Top 10 Best Car AMPS for Bass Reviews 2021 Updated
1. Kenwood KAC-M3004 Amplifier-Super Bass Sound Quality For Car
Features
- Channel: 4
- RMS power: 50 watts
- Power handling: 150 watts
- Peak power: 600 watts
- Impedance: 2-4 ohms
- Power gauge: 10
- Class D
Specifications
- Brand: KENWOOD
- Model: KAC-M3004
- Weight: 2.20lbs
- Model number: 22154656
- Dimensions: 6-1/2” x 1-3/4” x 3-7/8”
Overall rating: 4.6 out of 5
In short, this is a compact 4-channel amplifier. It can boot up your car using its 50 watts RMS and best bass amps. With that, you’ll be able to listen attentively to everything without any interference. This small workhorse can fit virtually anywhere. Besides, you can use it with a boat, motorcycle, or ATV.
Also, this product has a conformal coating and is a class D technology. Therefore, it has protection against weather conditions and dirt. And the speaker production terminal promotes plugs with plastic coverings. Thus, it has more protection for those connections.
This unit will receive a signal from any source even if you’re operating RCA cables. If you’re using the speaker-level inputs, this powerhouse will recognize it and power up. So, you may not require a remote to turn on your vehicle stereo.
Another feature is the protection circuitry for heat protection and insulation. Besides, it works for thermal overload, DC offset, and short circuits. You can mount it against an installation board. You can use 5/8 “thick or above with the M4 x 16mm self-tapping bolts that came with it. Moreover, it includes two 13.5” plastic rubber ties. That will help you secure the amplifier to a 2 x 4 board or any small piece. There’re eight 16-gauge wires for you to fix your speakers to the amp. This product is one of the best car amplifier for bass.
Pros
- Powerful and fits perfectly in motorcycle pairing
- Easy to install and setup
- Excellent amplification with HPF
- Amazing power
- Are loud enough
- Nice and compact
Cons
- There could be interference from a radio station.
2. Boss Audio R1100M Car Amplifier- A perfect sound provider
Features
- Channel: 1
- RMS power: 825 watts
- Power handling: 1100 watts
- Impedance: 2-4 ohms
- Inputs: High and low level
- Remote subwoofer control
Specifications
- Brand: Boss Audio
- Model: R110M
- Weight: 4.4 pounds
- Dimensions: 9.125” x 10.4375” x 2.25”
Overall rating: 4.3 out of 5
Increase your bass using the Boss Audio R1100M car amplifier. It features maximum power of 1100 watts, including MOSFET electric energy. Besides, it uses 2 ohms directed into one channel. That enables it to control a powerful subwoofer successfully. It also gives it extra strength to produce deep bass. Your audio appliance will surprise you when it is powered up.
With the variable low pass filter, you can run the frequencies that travel to the subwoofer. Likewise, the switchable bass boost provides top-notch deep-toned output. It has a wired remote to enable you to run the subwoofer degree for high-ranking sound.
Boss Audio has an automatic shut-off that offers protection to the amplifier while overheating. The variable input control grants the amplifier access to equal the output signal from the head unit. Thus, it will be able to attain optimum performance when you adjust it appropriately. MOSFET speedily changes from full to non-conduction for a more productive output.
This unit has class-A/B amplifiers, and they feature specific direct circuitry. Therefore, it will raise the sound quality and power production. It will also reduce distortion and improve efficiency. You can install this amplifier at anywhere you want due to its slim and compact make-up. Finally, Boss Audio has 3-years online trader warranty if you buy it through Amazon.
Pros
- Easy to install
- Comes with enough accessories
- Great value for the money
- Long-lasting product
- Boosts base production perfectly
- It’s very efficient
Cons
- Overheats sometimes
- Unclear remote instructions
3. Rockford Fosgate R500X1D Amplifier- Super Car sound creator
Features
- Channel: 1
- RMS power: 500 watts
- Impedance: 2-4 ohms
- Power handling: 500 watts
- Power gauge: 4
- MOSFET power supply
Specifications
- Brand: Rockford Fosgate
- Model: R500X1D
- Dimensions: 8.50 x 6.80 x 2.00 inches
- Weight: 5.09 pounds
Overall Rating: 4.7 out of 5
The Rockford Fosgate produces exceptional performance and will give you the next stage of audio excellence. It is of high-quality and energy-efficient class D amplifier. Therefore, it is super-efficient and delivers minimal heat. It also uses less energy when you compare it to class A/B amplifiers.
R500X1D features MOSFET power supply and high-level inputs. Others are muted turn on, phase switch, short circuit protection, and much more. This unit is monoblock, and it operates with one channel to a subwoofer. It uses 500 watts RMS at 2 ohms or 300 watts x 1 at 4 ohms. A MOSFET power supply feeds this amplifier, thereby making it capable enough to produce desired results. It also helps minimize sound distortion and allows the subwoofer to get pure sound waves from the unit.
This amplifier comes with a phase switch to keep your subwoofer operating together with other vehicle speakers. Thus, it will provide maximum sound impact and also balance sound output. Its punch boost provides high-quality sound. And it will vibrate your vehicle to the blare of the beats. The low-pass filter eliminates all the notes under its frequency settings. It will also enable you to keep high resonance away from your subwoofers. It is among the best car amplifier for bass, considering its features.
Pros
- Provides high-frequency input
- Compact and easy to install
- It has a nice and useful remote knob
- Has secure terminals
- Powerful enough to operate two subwoofers
Cons
- The 500 watts will not work well for big sound appliances.
4. NVX- VAD27001 Class D Monoblock a Powerful Car Amplifier
Features
- Channel: 1
- RMS power: 1250-2700 watts
- Peak Power: 5400 watts
- Power Gauge: 4
- Bass Knob: Yes
- Remote bass boost control
Specifications
- Brand: NVX
- Model: VAD27001
- Weight: 10 pounds
- Dimensions: 12.8 x 7.2 x 2 inches
Overall rating: 4.0 out of 5
Likewise, this is a highly-rated and extra-efficient product. It is 50% smaller than the new GM-series class-AB amplifiers. Yet, it is still versatile in terms of operation and installation. This unit features quality, performance, and usability. It uses a long cable to wire its remote bass boost control.
The NVX VAD27001 is unique due to its measurement. Therefore, it can fit with ease of limited vehicle spaces. However, the size of this unit should not make you feel that it will not perform well. It also features a wired bass boost remote control. You’ll be able to adjust the bass level to whatever you want to listen to any moment.
It’s variable Bass Boost 0 – +12 dB @ 45 Hz. The variable low-pass filter provides extra flexibility while adjusting audio frequencies. The amp is 1 ohm stable for maximum compatibility and power output. It features both low-pass and subsonic high-pass filters to finely tune your subwoofer The class D circuitry makes that achievable as it boosts power production potential. A revolutionary chip designed by International Rectifier (affectionately known as the IR Chip) eliminates high-frequency interference sometimes associated with older Class D circuits.
The circuitry is secure and durable. Therefore, it helps lessen the threat of a high power load for the amplifier to attain a 1-ohm connection. The design intensifies the flexibility to fix different subwoofers to a unit.
Pros
- Runs efficiently
- Excellent sound quality and compact size
- Fits easily into any car
- Adjustable low-pass filter
- Great value for the price
Cons
- Loose terminal wires
5. Rockford Fosgate PBR300X4- A Heart touching sound maker Car Amplifier
Features
- Channel: 4
- RMS power: 300 watts
- Power handling: 300 watts
- Impedance: 4 ohms
- Variable punch equalizer
- 2/4 channel input button
Specifications
- Brand: Rockford Fosgate
- Model: PBR300X4
- Weight: 2.53 pounds
- Dimensions: 9 x 6 x 3.4 inches
Overall rating: 4.4 out of 5
When you compare this product to other monoblock amps, it is a 4-channel amplifier. Also, it delivers 75 watts RMS at 4-ohms per channel. Thus, the overall RMS is 300, thereby making it a bit less powerful. It is compact enough to fit into any system.
The design of PBR300X4 makes it ideal for stereo anterior/back units that don’t have enough space. It is also perfect for systems with a lower current efficient charging unit, yet requires enough power. The 4-channels make it ideal for fixing straight to speakers. You can connect it to the front and back car audio unit configuration. With that, you don’t need to purchase any extra subwoofer. Of course, it may not provide you with enough bass using only speakers.
At such, the unit features a variable punch equalizer. You can adjust it to low-pass for an increase in varying base. High-pass offers medium bass and treble improvement. And all-pass for improving both treble and bass. You can use this product without a subwoofer, all thanks to the four channels.
This amplifier will welcome both speaker and RCA level wave models using identical inputs. The company offers a full 1-year warranty when you get it from a legal Rockford retailer.
Pros
- Easy to install and simple to use
- No overheating problems
- Boosts bass and treble
- 100% sound quality
- Great little amplifier
Cons
- Low power output
6. Alpine X-A90V X-Series- A 5 Channel Car Amplifier with powerful Bass
Features
- Channel: 5
- RMS power: 900 watts
- Power handling: 900 watts
- Sound Quality: Alpine ID
- Class D
Specifications
- Brand: Alpine
- Model: X-A90V
- Weight: 1 pound
- Dimensions: 6 x 11 x 14 inches
Overall Rating: 3.9 out of 5
The Alpine X-A90V delivers a pure and clean audio sound. It has enough power for the needs of your vehicle. This product is a small amplifier that offers a stable power supply and clear signal. However, this unit is expensive and comes with a five-channel output. One can divide it between four 100 watt RMS channels for front and back speakers. It includes one 500 watt RMS channel for a subwoofer, making it a total of 900 watt RMS. And it supplies steadily at 2 ohms.
Besides, the model has a smooth design with a broad, flat top, and rear-end exterior. Thus, it assembles readily for additional speaker and subwoofer connections. Also, all the controls are positioned at the front for a suitable passage when they pile up together. The X-A90V makes the 12″ sub breathe deep & heavy.
Further, it has controls that are easy to access at the front with simple adjustments. Installation is quick and easy, all thanks to its small footprint. Notwithstanding its compact size, power systems, including four other speakers, is a breeze.
You can run 6 full-range speakers and one or two subwoofers. Therefore, it is very efficient at generating a high power output. As a result, you’ll get more top sound quality and robust bass. All these capabilities make it one of the best car amplifier for bass.
Pros
- Extremely versatile
- Clean with plenty of power
- The cable plugs releases at ease
- Sharp and sleek design
- Easy to install due to the small footprint
- Efficient product
Cons
- Pricey
7. JL Audio JX 1000/1D Car Amplifier for excellent Bass sound
Features
- Channel: 1
- RMS power: 1000 watts
- Power handling: 1000 watts
- Impedance: 2-4 ohms
- Class D
- Adjustable bass boost
Specifications
- Brand: JL Audio
- Model: JX1000/1D
- Weight: 4.41 pounds
- Dimension: 14 x 9.5 x 4 inches
Overall rating: 45 out of 5
The JL Audio amplifier has a sturdy design and high-grade parts. Thus, it ensures excellent heat management. It also delivers high current flow. Some amp generates clicking sounds when you start it, which could be a great turn off. But, this model has a silent start up due to its excellent quality sound after starting it. It has a solid performance and is reliable at an affordable rate.
Besides, this product is a class D unit and is very sturdy. It comes with a 1000 watts RMS output at 2 ohms. Also, it features 750 wattages using 3 ohms and 500 wattages using 4 ohms. With that, there’s sufficient power to enable your subwoofer to release deep and blaring sound waves.
Meanwhile, its bass centers around 45Hz but, it can power up by adjusting it to any number within 0 and +12 dB. At such, you’ll be able to raise or lower the loudness of the bass to meet your preference.
A frequency filter comes with this product. It makes it possible to eliminate some high frequencies from getting to the sub. Hence, it will enable it to communicate low rates for the excellent bass outcome. Finally, it has an unlimited PVM changing kind of power supply.
Pros
- Incredible power
- Fits in small areas
- Powerful amp
- Excellent quality
- Soft start-up
- Can control a big sub
- Delivers a better and stable performance
Cons
- Imperfect sound quality
8. Planet Audio AC1200 Car Amplifier- It Makes Music Quality High
Features
- Channel: 2
- RMS power: 900 watts
- Power handling: 1200 watts
- Impedance: 2-4 ohms
- Inputs: High and low level
- Class A/B
Specifications
- Brand: Planet Audio
- Model: AC1200.2
- Weight: 7.5 pounds
- Dimensions: 12 x 10 x 2.4 inches
Overall rating: 4.3 out of 5
With this product, you’ll be able to turn up the beat and enjoy all day long. It features a 2-channel class A/B amplifier with 1200 watts maximum power. It also features a MOSFET power supply to operate a set of speakers. Besides, it can power two subwoofers at 4-ohms. Or it can run two sets of speakers or four subwoofers at 2-ohms.
Moreover, you can customize the sound using the different low and high-pass transverse. The MOSFET quickly switches from total to non-conduction for more efficient output. Another feature is the distinct linear circuitry that raises the standard of sound and power production. Thus, it reduces distortion and improves efficiency.
Further, you can merge the channels of a two or four-channel amplifier to get an abrupt rise in power yield. 2-ohm steady power speakers or subwoofers can be used effortlessly when you’re using it with 2-ohms. As a result, it will deliver more power and volume. The different low-pass filter provides dominance over the frequencies that go across the subwoofer. And, the variable high-pass filter offers control over the frequencies that go across the complete spectrum speakers.
Using the variable bass boost enables one to modify the low bass inside the boost reach. It has an automatic shut-off to protect the amplifier from overheating. There’s a wired remote for you to manage the subwoofer at ease for better output and higher sound.
Pros
- Works great
- Sun and amp sounds perfect
- Solid beat drop bass
- Offers clear and clean audio
- Easy to control settings
- Decent build quality
Cons
- Overheating problems sometimes
9. Pioneer GM-D9701- A Powerful Car Amplifier
Features
- Channel: 1
- RMS power: 1200 watts
- Power handling: 2400 watts
- Impedance: 2-4 ohms
- Class D
- Variable low-pass filter
Specifications
- Brand: Pioneer
- Model: GMD-9701 + ALPHA
- Weight: 8.6 pounds
- Dimension: 15.2 x 10.8 x 4.7 inches
Overall rating: 4.1 out of 5
Pioneer GM-D9701 is a product with great design and is extremely powerful. It is a small and compact amplifier with a bass knob. With that, you will have extra control of your bass from the comfort of your car. This model can provide up to 1200 watts RMS to your subwoofer. Thus, you’ll get a powerful bass with each song you play.
Further, it is a highly-efficient class D amplifier that enables this unit to operate effectively. It also allows for a little chassis that fixes in a variety of spaces. Besides, this small powerhouse can use a 1-ohm load. Therefore, you don’t need to disturb yourself whether the impedance will match an additional sub.
This unit features speaker-level inputs to enable you to install the amplifier in a company system without RCA connections. Meanwhile, the low-pass filter lets you enhance effortlessly and set the bass to fit your car interior. The wired remote boost allows you to manage the level of a bass boost from where you’re sitting.
The power output is perfect, and it includes a 3mm Allen wrench. Hence, you can use it to tighten and loosen the terminals. Also, the fuse rating is 40A X 3, and the company offers a 60-day money-back guarantee.
Pros
- Perfect and streamlined amp
- Well-built
- Very efficient
- Brings out big bass
- Has a pleasing aesthetic
- Perfect packaging
Cons
- Makes a little more noise and distortion
10. Alpine R-A75M Car Amplifier with Powerful Bass Sound
Features
- Channel: 1
- RMS power: 750 watts
- Power handling: 1500 watts
- Impedance: 2-4 ohms
- Bass boost: 0-12 dB
- Class D
Specifications
- Brand: Alpine
- Model: R-A75M + 0KIT
- Weight: 8.05 pounds
- Dimension: 12 x 12 x 6 inches
Overall rating: 4.0 out of 5
In short, this product will reproduce the bass in your music as you relax and enjoy inside your car. The company uses hot technology from its higher ranking X-series amplifiers for this unit. That includes high-efficiency transformers in constructing this model.
This device delivers up to 750 watts RMS quickly and correctly matches the power grading of R-Series subwoofers. This amp is compact enough to fit into small vehicle spaces. You can modify the unit’s low-pass filter. Even the bass boost and subsonic filter are easy to adjust. Thus, you will get the correct bass tone while playing music.
This new technology reduces audible faults like unwanted interior reverberation that can worsen sound quality. Meanwhile, this R-Series amp features a bandpass filter. Therefore, you’ll be able to sketch an operative speaker structure without a different processor.
Pros
- Has plenty of power with a reasonable price
- High-quality MOSFET and capacitors
- Stunning and bold design
Cons
- Goes into protection mode too easily
Check out more: Best truck bed bike racks.
Buying guide for the best car amplifier for bass
Below are certain factors to consider before buying the best car amplifier for bass:
Number of channels
One of the most crucial things to look out for is how many channels you need. The number of channels primarily implies output parts to generate exterior speakers or subs. A one channel amp is useful for driving subs only. Multi-channel amps, on the other hand, are capable of powering a sub and many speakers.
The working of an amplifier splits between the channels. An underpowered speaker by a low-quality amp causes a distortion. So, it is ideal to buy a more significant car amp with enough power to avoid problems. You can bridge a multi-channel amplifier to get extra power to a sub, thereby gaining additional bass for your unit.
Size
Also, this is a vital feature to consider due to limited spaces in vehicles. Therefore, it may be difficult for large amplifiers to fit. Preferably, a compact but the feature-filled amp is perfect for purchase. That is because it is easy to install.
Amplifier impedance
Impedance is the active resistance of a speaker, especially car amplifiers. Meanwhile, its measurement is in ohms. If you want to improve the sound quality of your amp, then you should check this factor. Inspect the fuses to know the type they’re using for the audio unit. Meanwhile, the Best car amplifier for bass has the typical impedance wattage for your amp.
Power
Any Best car amplifier for bass should be able to deliver enough power output. The measurement of an amplifier’s strength is in RMS rating. They also use peak power to measure it. RMS rating is very crucial as it is the real power that delivers between the device channels. The higher it gets, the more power the amplifier will distribute to your unit. Thus, it will offer you louder, undistorted audio.
For an amplifier with many channels, endeavor to inspect the RMS rating of each of the channels. After that, look at the difference between your sub and speaker rating.
Amplifier car type
You can distinguish car amplifiers through their classes. That means the kind of circuitry manufacturers use to make it and the features. There’re five main classes, namely: A, B, A/B, D, and G/H.
- Class A is the most accessible type of amplifier, and it comprises one transistor in rectilinear mode.
- Class B is more structured than A. That is because it has a set of conductors that operate in a push-pull organization. Yet, it has a higher possibility of malformation due to the structure.
- Class A/B: Mixing A and B with their transistors operate by directing current anytime there’s no input wave. But, whenever the line input comes up, a single transistor works.
- Class D transistors are more of electronic switches and provide direct benefits than other classes.
- Class G/H is a revised version of A/B and operates by running the power supply.
Installation
It could be a little bit tricky to install car amps. So, it is ideal for you to research more before installation to avoid any faults or damages.
FAQS about car bass amplifier
How many amps do I need for my car audio system?
In some cases, you may need a single amp for all the speakers in your vehicle. Therefore, you’ll have to use different channels on the amp so that each channel will run one speaker. Though some vehicles have four speakers yet four-channel amps are well-liked. You will get more choices with a five or six-channel amp.
What hits harder 2 ohms or 4 ohms?
A lower electrical resistance subwoofer offers a more significant sound than a large version. At such 2 ohm subwoofers provides more loudness than 4 ohms. However, 2-ohm subwoofers tend to generate poor sound quality because it consumes power.
How many watts do you need for a subwoofer?
For a factory radio, you’ll need about 50 to 200 watts RMS of power to get strong bass. Meanwhile, an aftermarket receiver requires 200 to 300 watts RMS of power. 250 to 500 watts of power are ideal for amplified speakers with 50 watts RMS for each channel.
Do more watts mean more bass?
Extra watts equal a more robust bass response. Meanwhile, Bass frequencies need additional power to get loud against mid-treble frequencies. A lower frequency requires more power to get louder. Therefore, most people choose to play their 100 or 120-watt units at a low volume inside their bedrooms. That is because of the bass response the speaker emits.
How many watts is an excellent speaker?
For a lover of uncompressed music with 90dB efficient speakers, 200 watts will give you enough power. If you like playing soft music like classical and don’t need too much bass, then 50 watts is sufficient. Horns in trucks use few watts though they’re of higher efficiency.
How do I increase the bass on my amp?
Most importantly, endeavor to turn them off.
1. Firstly, turn down the gain, filters, and bass boost.
2. Put on the benefit until a distortion occurs. After that, back it off until you get a clean sound.
3. Modify the low-pass filter downwards to get rid of high and midway frequency notation.
4. Finally, play using the bass boost.
How do I know if my speaker has good bass?
The human ear can hear within 20Hz and 20 kHz. But, with bass frequencies under 30 Hz, one might not even feel it. Thus, any speaker is 50Hz or below is better and does not require pairing with a subwoofer.
Conclusion
Choosing the Best car amplifier for bass is not an easy task. That is because there’re so many models out there. Most of the amp in this review has defining characteristics that one must consider before buying.
Get an amplifier that has a variable low-pass filter adjustment. Thus, you’ll get better performance and be able to shape your likeness. If you’re low on budget, you’ll still get affordable amplifiers that are of high-quality.
Plan well before you make any move into the market to get this product. If you need an upgrade, check the watts to get better audio clarity. Also, you need to understand the dynamics and definitions of some parts.
Finally, this Best car amplifier for bass review and buying guide will help you decide on the best one. So, go through it thoroughly to make the right choice.
You may also like to visit our other reviews:
Best Tuner for Jeep jk.
Best tonneau cover for ram 1500.
10 Best replacement shocks for Chevy Silverado.
10 Best Aux Cable of 2021- An Expert Review and Buying Guide
